I wanted to create my own fabric label for a long time. But I couldn't find a best way to print my own label. I read a lot of tutorials from different websites but still do not give me a good result. Therefore, I have done some experiments by using three different methods.
Method 1: Using Vinegar
- I ironed the fabric on a piece of freezer paper.
- Printed my design on the fabric.
- Let it dried for 5 minutes. Then, peeled the paper off the fabric.
- Ironed the fabric and let it set.
- Rinsed fabric in a pan of white vinegar , yes it's VINEGAR for 1 minute.
.
- Laid flat on a towel and blowed dry the it.
Result:
It turned out like this......
Pros- This is a healthy way of creating your fabric label as I didn't touch any of the chemical stuff to make the prints set on the fabric. In another word, this is an Organic Way of printing your own fabric label!
Cons- I don't think it looks great though!
Right, let's move on to the 2nd method!
Method 2: Using Bubble Jet Set
- Poured the solution into a flat pan and saturated fabric in solution for 5 minutes.
- Dried the fabric.
- Ironed the fabric on a piece of freezer paper.
- Printed my design on the fabric.
- Let the fabric sit for 30 minutes.
- Hand washed the fabric in cold water.
-Laid flat on a towel and blowed dry the it.
Result:
.... not too bad. I like it!
Can you see the difference?
Pros- The result was so GOOD!
Cons- Poisoning way of creating your fabric label! Do you know why? This solution contains
Formaldehyde, commonly called
formalin. Do you know what is that for? It is used to
"Formaldehyde is highly toxic to humans, regardless of method of intake. Ingestion of as little as 30 mL (1 oz.) of a solution containing 37% formaldehyde has been reported to cause death in an adult. " From Wikipedia.
This bubble jet solution contains a very small amount of formaldehyde at a concentration of 0.001%. I think it is safe enough to use as long as you keep it away from children.
Method 3: Using Miracle Fabric Sheets
Here is the tute:
Step 1:
Create an image or photograph using your computer, digital camera or scanner.
Tips: Print your design on paper first before print on the fabric. Check and align it well before you print it.
Step 2:
Print fabric sheets in your printer tray and print design on the fabric side.
Step 3:
Remove paper backing from fabric sheet.
Step 4:
Iron on the unprinted side of fabric to heat set the image.
Tips: Do not use steam!
Step 5:
Rinse fabric sheet in a pan of cold water for 1 minute.
Step 6:
Lay flat on a towel and allow to air dry or blow dry.
Tada! Here you go ... I have created my own fabric labels with a superb result!
There are many ways of making your own fabric labels. Choose a suitable one and experiment it! Please don't forget to leave a comment! Thank you!
